Standard Servo

 
 
 

   
                   
     

Specifications

     
   

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.19sec/60 at no load
Operating Speed (6.0V):
0.15sec/60 at no load
Stall Torque (4.8V):
42 oz/in (3.0 kg/cm)
Stall Torque (6.0V):
49 oz/in (4.5 kg/cm)
Current Drain (4.8V):
7.4mA/idle, 160mA no load operating
Current Drain (6.0V): 7.7mA/idle, 180mA no load operating
Dead Band Width: 5usec
Operating Angle: 40 one side pulse traveling 400usec
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Motor Type: Cored Metal Brush
Potentiometer Drive: 4 Slider/Direct Drive
Bearing Type: Top/Resin Bushing
Gear Type: Nylon
Connector Wire Length: 11.81" (300mm)
Weight: 1.52oz (43g)

   
               
       Lead Identification      
       Ground (0v)  Black      
       V+ (4.8v  to 6v)  Red      
       Pulse Signal  Yellow      
                   
       

         
                   
                   
 

.      .

 
 

Copyright pc-control.co.uk 2008