Beedriver Adaptor Board
Providing High Voltage Switching Outputs from Standard Digital Outputs
(Interfacing standard CMOS digital logic to Motors, Relays, Lamps
etc...)
Use the Bee-Driver to switch higher voltage (up to 50v) and current loads (up to 500mA) using standard digital outputs from your own electronics project or from one of our USB adaptor boards. The 20 way header connector on the Bee-Driver is pin compatible with the digital output connectors on the Maxi-Bee , the Digi-Bee and the Digi-Bee+. Connecting a Bee-Driver to one of the 20 way digital output headers via a standard 20 way ribbon cable assembly (not included) provides 14 high voltage switching outputs and 2 LED indicators. The screw terminals on the Bee-Driver also have transient suppression facilities on two terminals to assist in direct connection to inductive devices such as motors and relays. connecting motors lamps and inductive loads to a PC
Since the Maxi-Bee has 4 such output connectors it is possible to connect up to 4 Bee-Drivers to 1 Maxi-Bee giving a massive 56 high voltage switches and 8 LED indicators. The Bee-Driver may also be used in your own electronics projects without a Digi-Bee, Digi-Bee+ or Maxi-Bee to convert your digital outputs into more useful switching ones..
|
(Note: This is not a "kit of parts" , it is fully assembled and tested) |
|
| & | |
| To download a copy
of the data sheet for this board, right click on the link on the
right and choose "save target as". This will allow you to
download a PDF copy of this sheet. |
 Data Sheet |
| You will need Adobe Reader installed on your PC to read this document. Adobe reader is available for free download from Adobe using the link to the right. |
 |
